Wear相关论文
Numerous medical devices have been applied for the treatment or alleviation of various diseases. Tribological issues wid......
Semi-autogenous grinding (SAG) mill is widely used in the grinding process of coal and ores because of its strong applic......
Quantitative analysis of the tribological properties of phosphate glass at the nano- and macro-scale
Processing (grinding, polishing) of phosphate laser (PL) glass involves material removal at two vastly different (spatia......
The shaft mechanical face seal in a high-speed turbopump of a liquid rocket engine often operates under extremely harsh ......
The mechanism of hard surfaces worn by soft polymers is not clearly understood. In this paper, a new hypothesis has been......
Galling phenomena in metal forming not only affect the quality of the engineered surfaces but also the success or failur......
研究了不同Sn含量流变铸造AZ91合金的组织演化、拉伸行为及磨损性能.结果 表明:Sn的合金化改变了A1在镁基体中的固溶度,并且显著细......
Effect of graphene addition on the physicomechanical and tribological properties of Cu nanocomposite
This paper presents an experimental investigation of the mechanical and tribological properties of Cu–graphene nanoshee......
采用等离子体电解氧化(PEO)在AM 50镁合金表面制备涂层,研究添加黏土微粒对涂层显微组织、磨损和腐蚀行为的影响.采用铝基电解液制......
Rolling process based on the plastic deformation as a surface strengthening treatment was employed, aiming to improve th......
In this work, the serpentine powders were sintered to make the serpentine-reinforced Al-matrix composites, and the micro......
Enhanced Wear Resistance of Ni/h-BN Composites with Graphene Addition Produced by Spark Plasma Sinte
Ni-based self-lubricating composites containing a fixed amount of hexagonal boron nitride (h-BN) (5 wt％) and different am......
Effect of Electric Potentials on Microstructure, Corrosion and Wear Characteristic of the Nitrided L
Plasma nitriding is a widely used technology to enhance the surface performance and extend the service life of alloy par......
Electrodeposited Ni-W-TiC Composite Coatings: Effect of TiC Reinforcement on Microstructural and Tri
Ni-W-TiC composite coatings were prepared via electrodeposition technique by dispersing the different amount of TiC part......
Wear behaviors of 3Cr2W8V and GH4169 with H70, including surface property, wear performance and friction work, were inve......
Microstructure and Wear Resistance of in situ NbC Particles Reinforced Ni-based Alloy Composite Coat
...
...
...
In order to improve the surface performance and increase the lifetime of P110 oil casing tube steel during operation, el......
Wear resistances of CO2 corrosion product iflms formed on P110 carbon steel at different CO2 partial pressures were inve......
A duplex treatment of plasma Zr-alloying and plasma nitriding was used to improve the tribological properties of Ti-6Al-......
To verify the effect of Al2O3 particle content and size as an abrasive on resin matrix friction materials for mining equ......
Coordinately Improving the Wear and Fatigue Properties of Ti6Al4V Alloy by Designed CrZr-alloyed Lay
A CrZr-alloyed layer was prepared through a pre-zirconizing and subsequent chromizing treatment on a Ti6Al4V substrate.A......
The friction and wear properties of silicon surface covered with octadecyltrichloro-silane (OTS) self-assembled monolaye......
SiC/Cu composites were prepared by hot pressing.The high temperature tribological properties of the composites were inve......
The study of third-body wear behavior of the plasma-nitrided titanium with particles under air condi
The friction and third body wear behaviors of surface strengthened titanium alloy(TA2) were experimentally studied under......
The TiSiC coating was deposited on the surface of Ti6Al4V by multi arc plating technique. The composition, microstructur......
In order to account for the plastic surface deformation occurring in cold rolling,a novel,3-D Stribeck curve is proposed......
Friction and wear behaviors of PI/UHMWPE blends using a high temperature reciprocating tests: effect
In this work, polyimide (PI) and ultra-high molecular weight polyethylene (UHMWPE) were used to fabricate composites by ......
Magnesium alloys have attracted more and more attention to be used in biomedical implants due to their good mechanical p......
Effect of titanium diboride coating on the performances of copper electrode during spot welding galv
Titanium diboride was deposited on the surface of nickel coated copper electrode by electro sparking. The performances o......
Influence of oxygen flow rate on the microstructure and properties of HVOF-sprayed multimodal WC-17C
Multimodal WC-17Co coatings with 50% nano-WC and 50% micro-WC were prepared on Q235 steel substrate by high velocity oxy......
An Investigation into the Wear Behaviour of High Speed Steel Work Roll Material under Service Condit
HSS work rolls have been utilized for both early and last finishing stands in hot strip mills due to their high hardness......
...
High Temperature Tribological Properties of Plasma Sprayed NiCoCrAIY/BaF2/CaF2/WSe2/Y Solid Lubrican
BaF2/CaF2 is well-known for the solid lubricant properties at evaluated temperature and used as self-lubricants in vacuu......
In precise stamping field,wear is one of main failure modes during production process.While thin layers coating with hig......
Antibacterial and wear properties of carbon and nitrogen codoped TiO2 coatings prepared by oxidation
Antibacterial modification of medical stainless steel (SS) has already been developed as a potentially effective method ......
Microstructure and tribomechanical properties of (Cr, N)-DLC/DLC multilayer films deposited by a com
Alternating multilayer diamond-like carbon (DLC) films [(Cr, N)-DLC/DLC] with different sp3 contents in DLC layer have b......
Gontermann-Peipers GmbH(GP)Germany developed a new,high alloyed steel grade(Hot working steel)for the manufacturing of b......
Nanoparticles were successfully used as functional components in polymer composites to improve mechanical properties and......
Tribological Characteristics of Gamma-Irradiated UHMWPE against TiN Coated Surface on the Co-Cr Allo
...
The correlation of structure,wear and corrosion behaviors for chromium coatings electrodeposited fro
The effects of structure on the wear and corrosion behaviors of nanocrystalline (nc) and amorphous (ac) chromium coating......
THE DESIGN AND TRIAL OF INTELLIGENT SLIDING BEARING SYSTEM TO REALIZE SELF-MONITORING AND SELF-CONTR
This paper introduces a patented intelligent sliding bearing system in a roller cone bit,by which the early warning of b......
Influence of Different Reinforcement Particles on Prepartion and Performance of Ni-Co-P Based Electr
In this work,three particles(aluminium oxide,silicon nitride and silicon carbide)with the same size were successfully co......
In cryogenic applications,bearings,seals,valves etc are extensively used.When there is relative motion with interactive ......
